Over the years I have fitted decoders to more engines than I care to remember, I have been given the job of fittng a decoder to an 0n30 2-6-0 today, I did one years ago but I have totally forgotton how the chassis is removed from the body.
Would appreciate if someone could enlighten me!!
Many Thanks
Steve
http://www.pacificcoastairlinerr.com/mogul_dcc/ (http://www.pacificcoastairlinerr.com/mogul_dcc/)
Thank you if you visit
Harold
Hi Harold
Many thanks for your quick reply, within 5 mins of reading it the body was off the chassis!!
It all coming back to me now, I have managed to keep clear of the 2-6-0 for many years, but someone begged me to fit a decoder!!
THe job will have to wait until tomorrow now as its getting late over here!
Once again many thanks
Steve
The decoder fitting was completed succesfully, it took arouund 20 mins. to do loco runs fine.
Interesting to see how little the loco has changed internally over the years ( the last one I took the body off was just after their initial launch which must be around 15yrs ago?) I think the only significant change is the working front coupler!