Print Page - Help

Title: Help
Post by: Milford Rail on January 21, 2008, 10:59:36 AM

I have a Bachmann 4-4-0 Steam Engine,that I cannot get the main drive
wheels to turn.Being new to model trains I need to ask a question.I have
noticed that there is a plastic ring above each of the drive wheels does
this ring keep the wheels from turning,or do I have another problem?
Thanks for any help you can provide.
Arthur

Title: Re: Help
Post by: THB-DAVE on January 21, 2008, 11:35:33 AM

Hi Arthur: Bachman offers 4-4-0 in 3 scales, HO, ON30 and G, if you tell us what scale you have it will help in identifying your problem.

Dave

Title: Re: Help
Post by: Milford Rail on January 21, 2008, 07:42:44 PM

Dave,
The engine is a HO Model.
Thanks
Arthur

Title: Re: Help
Post by: the Bach-man on January 21, 2008, 11:50:24 PM

Dear Arthur,
Now we're halfway there. Is your loco the Spectrum model, or the Standard line 1870s model. If the latter, you probably need a drive shaft, as the motor is in the tender. Our service department can supply one if this is indeed the problem.
Have fun!
the Bach-man

Title: Re: Help
Post by: Milford Rail on January 22, 2008, 09:13:15 AM

Bach-mann
The engine is a 1870s because the engine is not in the tender.
Thanks
Arthur
P.S. Is there any tests I can make to find out if it is indeed the drive shaft.

Bachmann Online Forum

Discussion Boards => General Discussion => Topic started by: Milford Rail on January 21, 2008, 10:59:36 AM