Yes, each time of an engine stall on turnout my EZcommand flash and beep.

Luc

I check the voltage and is steel the same all around the layout, and yes it 's an short i can see the little spark from engine wheel.

Luc

I disconect all turnout to use it manually, no change (short again),
no the turnout are not cotroled by th ez command and don't know if the frog are insuleted.

Luc

same ting, short circuit.

Luc

Yes powerlock by lifelike.

All the turnout are connected to the main line by one side and to dead end to other side.
Luc

All turnout are conected to main line from one side and to dead end to outher side.

Six turnout, they collected directly to acc from the power pack, i follow the installation indication from life like.

Only one

No, they stop at the short and the only way to backward is  puting the engine forward.(on the controler).

Luc

Yes that's exacly the probleme (WoundedBear ).

Sorry for my english

Luc

Hello,
I am a newbee in model rairoading and i built an small layout (4x8) i used easy command from Bachmann with 4 dcc engines, the track came from life like power lock, my brobleme came with the switch all my engine turn to short circuit when goes backward on every switch, how can turn this trouble off.

Luc

Hello, if i understand i unplug the 4 wires plug from the dummy plug and replug it in the decoder plug...

Luc

Tank's

Luc

Tank's but i need to know where solder each wire (color code)

Luc