Mr B,
Would u be able to tell me how long each stall is for Tidmouth Sheds/what pieces of E-Z Track would placed inside?
Dear TF,
They're about a foot long; long enough for a piece of 9" straight and a bumper.
I'll ask for a measurement.
Have fun!
the Bach-man
Great question, but is the kit going to come with all the track or does it need to be purchased seperatly
Dear J,
No track is included.
Have fun!
the Bach-man
Quote from: the Bach-man on March 18, 2010, 11:50:09 PM
Dear TF,
They're about a foot long; long enough for a piece of 9" straight and a bumper.
I'll ask for a measurement.
Have fun!
the Bach-man
Thanks! ;D Now I can make an accurate track plan
what size is the roundtable and what is the spacing between stalls. can the stall doors be motorized to open and close???
Quote from: jgaynor on March 22, 2010, 01:52:25 PM
what size is the roundtable and what is the spacing between stalls. can the stall doors be motorized to open and close???
the turntable, I'm guessing, is the same length as the stalls. For the doors, that's something you'd have to look into.
does Bach-man or anyone have an update on the release of the Tidmouth Shed Kit. I'm looking forward to getting it and setting it up for my layout
thanks
John
Quote from: jgaynor on April 20, 2010, 12:55:14 PM
does Bach-man or anyone have an update on the release of the Tidmouth Shed Kit. I'm looking forward to getting it and setting it up for my layout
thanks
John
Umm....
I would say early may to late june, but just a guess
If a straight piece is 9" long inside a stall, Gordon, Spencer, and Henry are out of a place to rest...
Dear All,
I'm told that the platforms are long enough for a large engine and long coach.
Anticipate!
the Bach-man
Quote from: the Bach-man on April 21, 2010, 11:00:28 PM
Dear All,
I'm told that the platforms are long enough for a large engine and long coach.
Anticipate!
the Bach-man
Wow!
Thats alot of space!
omg that's great! and so can we expect it by the end of june?
OK I don't know if this has been thought of, but is it possible to place a section of track between the stalls and the round table to make it look more like the roundhouse in the series. Can you adapt the kit do do this.
Not sure what you said, but there are add-on stalls to be for sale.
look at the Bachmann picture of their Tidmouth shed then look at the Tidmouth shed in the Series there are lengths of track between the shed itself and the round house, where the engines can come out and sit outside
I was just curious if is possible to do the same with the kit
Quote from: the Bach-man on April 21, 2010, 11:00:28 PM
Dear All,
I'm told that the platforms are long enough for a large engine and long coach.
Anticipate!
the Bach-man
Wow, that is alot of space. I was hoping for at least enough room for the large engines plus their tenders. So that's good! I do wish we had detailed demensions though as I'd like to know if it will fit into my layout I'm planning.