Text only | Text with Images

Bachmann Online Forum

Discussion Boards => HO => Topic started by: HUDnOTOW on May 01, 2014, 07:07:01 PM

Title: Reset of DCC decoder in HO Climax
Post by: HUDnOTOW on May 01, 2014, 07:07:01 PM
I have lost communication with my DCC (non sound) HO Climax with factory installed decoder.  Can anyone provide instructions for resetting the decoder to factory default settings?

Thanks,  Hud
Title: Re: Reset of DCC decoder in HO Climax
Post by: Hunt on May 01, 2014, 07:22:01 PM
Program an 8 to CV 8.



A 1000 Ohm, ΒΌ Watt resistor across the programming track is required for CV read and programming  a non-sound Bachmann(Lenz based) decoder used with a Digitrax Zephyr(DCS50) or Zephyr Xtra(DCS51).
Text only | Text with Images