Hi, I'm new to these forums. I have a Bachmann Spectrum HHP-8 (HO Scale) #655. It will only run in one direction. It runs backwards with no problems, but when I reverse the direction, the LEDs switch directions, glow briefly, then die, and the locomotive does not move. It also emits a smell that smells like an electrical fire.
I am testing the loco on DC (rule of thumb is to test the loco on DC before installing DCC) and I'm using a Bachmann Model #6607 power pack.
I tested another locomotive (a Proto 2000 GP60) and it ran fine, so it's not the power pack.
I run DCC, but I generally test all locomotives on DC to make sure they run OK before I install a decoder.
I am testing the loco on DC (rule of thumb is to test the loco on DC before installing DCC) and I'm using a Bachmann Model #6607 power pack.
I tested another locomotive (a Proto 2000 GP60) and it ran fine, so it's not the power pack.
I run DCC, but I generally test all locomotives on DC to make sure they run OK before I install a decoder.