Print Page - Adding sound to a Climax

Title: Adding sound to a Climax
Post by: Dekon on August 22, 2016, 11:14:33 AM

Hello all,
I just got my original run Climax back from Bachmann after having the gears replaced and I would now like to add sound to it. The problem is the first run of the Climax has an 8 pin socket and the sound board has 21 pins. What are my options?
Thanks

Title: Re: Adding sound to a Climax
Post by: Bucksco on August 22, 2016, 01:04:28 PM

If you are referring to item 44956 which is the sound module for the recently released 50 ton Climax it is not a sound decoder - it is just the sound module that plugs into the decoder that comes already installed in that loco. You will need to choose a DCC/Sound decoder and speaker to install in the loco. You may want to check the SoundTraxx website
http://www.soundtraxx.com/choose/index.php

Title: Re: Adding sound to a Climax
Post by: Dekon on August 23, 2016, 09:39:07 AM

Thank you for the reply.

Bachmann Online Forum

Discussion Boards => HO => Topic started by: Dekon on August 22, 2016, 11:14:33 AM