Print Page - Empty Socket On EP5 Circuit Board

Title: Empty Socket On EP5 Circuit Board
Post by: Texas Pete on October 26, 2009, 03:05:55 PM

On my recently acquired EP5 the circuit board has an empty socket with two connector pins. What is the purpose of this socket?

Texas Pete

Title: Re: Empty Socket On EP5 Circuit Board
Post by: 3rail on October 27, 2009, 12:04:17 PM

Hi Pete:

It can be used for additional motors on a second powered unit. This allows them to be controlled by one reverse board. You would have to run a wire harness to the second unit.

Regards,

3rail

Bachmann Online Forum

Discussion Boards => Williams by Bachmann => Topic started by: Texas Pete on October 26, 2009, 03:05:55 PM