There are new folks asking questions about the Big Hauler 4-6-0's. I will re post the info for their benefit.
So you have a Bachmann 4-6-0 and you want to know which chassis version it has. Here is how to tell.
Big Hauler 4-6-0 Chassis Version Identification by Bill Canelos Copyright 2002-2015 by Bill Canelos All rights reserved.
Version 1 1988-1990 Battery Powered R/C Units
Version 2 1990-1994 Smooth Bottom Cover You can turn drivers by hand and motor will turn
Version 3 1994-1998 Smooth Bottom Cover You cannot turn the drivers by hand
Version 4 1998-1999 Large wide hump dead center between the rear drivers on bottom cover
Version 5 2000-Pres 3/8th inch wide hump offset between the rear drivers and a plastic lubrication plug the size of a dime to the rear of the hump..
Version 6 2011-Pres New Chassis for Annie only, has metal gears and new front truck identifiable only by the new front truck
Note that the dates overlap and as of Feb 1, 2012 have not been fixed more precisely, but all new sets introduced in 1999 with the VHS instructions were version 5
The following sets released in late 1999 were Version 5 Chassis 90031, 90032, 90033, 90034, 90035 and 90037.
All Big Hauler 4-6-0's manufactured after 2000 have the version 5 chassis, all new sets after 2000 have it as well.
As of Feb 2012 Sets have version 5 chassis but all new Annies produced from late 2011 have the version 6 chassis it remains unclear if version 6 chassis will be included in sets at some future date
Hope this helps.
Loco Bill
Thanks Bill! This means my "Annie" I recently bought is actually a Ver. 5 engine ::)
Not too upset (it runs well now that I've fixed things, zero cost but a few hours of labor involved), but the seller will not be getting any more of my business.
Admins, this needs to be a sticky!
Bob D.
Thank You Bill I now have a printed copy.....