News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - helifreak

#1
General Discussion / Re: K27 front pilot problem.
July 23, 2008, 02:24:24 AM
Thanks for the help guy's.

Andrew
#2
General Discussion / Re: K27 front pilot problem.
July 22, 2008, 04:13:15 PM
John,
Have checked as you suggested, as near as I can measure the distance is around 4cm which by my calculation is greater than 1.575 in. but is it significant enough to be the cause
of my problems

Andrew
#3
General Discussion / Re: K27 front pilot problem.
July 21, 2008, 05:12:43 PM
Many thanks John,
I never thought of that. I will measure up tommorow

regards, Andrew
#4
General Discussion / K27 front pilot problem.
July 21, 2008, 03:52:42 PM
My new K27 ( Fitted with Plow ) seems to have a problem when negotiating turns and switches. The front pilot de-rails or "leaps" off the rails. The problem seems to be not enough weight over the pilot truck. I have added a plastic shim to the plate which the plunger runs against and this as reduced the problem but not fully rectified it. To help we have just about relaid three quarters of the railroad, making smoother curves, filing the switches etc all have helped but still not cured. To say I am disapointed in this loco is an understatement. My LGB Sumpter Valley / Aristo Dash 9 and Malletts have no problems on this track, only the K27, any suggestions

Andrew