I just switched from N to HO scale and am building a switching layout based in the Twin cities ( MN ) in the mid fifties. I pick up a used Bachmann 0-6-0 with full valve gear and started sanding off the boiler piping and added wire to it. This engine really runs nice and with some added details is a great value.
I have since got a used DCC 0-6-0 and am going to mount my modified boiler to it and now have a spectrum tender that I will wire to the engine. This newer DCC mech also runs very good.
** side point, do not switch the gear cover screws on the older plastic axle sleeve 0-6-0. The longer front screw will go into the intermediate gear and distort it. Guess how I know?
I will post photos when I am done with this engine. Maybe a video when I have track to run it on.
Looking forward to it. I have 5 of those little engines and have enjoyed tinkering with them.
Regards,
jonathan
Here is My weathered and detailed Bachmann USRA 0-6-0 with DCC. The wires out the back will connect to this tender when I add contact trucks.
Progressive rail is a newer railroad serving the twin cities and south to Northfield ( MN ) on some former MNS trackage and now have added other lines.
https://www.youtube.com/watch?v=HNO4-skpOsg
Nice progress. I like what you've done so far.
Let me know when you have trackage rights all the way to Rochester. I'll stop by. ;D
Regards,
Jonathan