We added some reversing Interlock switches a month ago and made a simple control panel to operate them. The idea to build further to this project with signal masts on the layout with a very simple wiring method was attempted. It turned out very well.
The lights signals modelled are based on UP information that I found on the internet and are a partial CTC operation as I have no flashing lights nor yellow lights.
The cost per signal mast differs a little depending on the # of lights and heads. Average was less than $8 each and I have enough stuff to make 20 more if I get some more heads.
Attached are some pic's, hope you like them.
(http://i219.photobucket.com/albums/cc149/bbrad20/Signalisgo.jpg)
(http://i219.photobucket.com/albums/cc149/bbrad20/Signalisstop.jpg)
I have added some links on 'how to stuff' that will explain everything. If anybody wants to try this I can send power points that you can modify for your application. Please email me privately.
http://i219.photobucket.com/albums/cc149/bbrad20/Slide1.jpg
http://i219.photobucket.com/albums/cc149/bbrad20/Slide2.jpg
http://i219.photobucket.com/albums/cc149/bbrad20/Slide3.jpg
http://i219.photobucket.com/albums/cc149/bbrad20/Slide4.jpg
http://i219.photobucket.com/albums/cc149/bbrad20/Slide5.jpg
http://i219.photobucket.com/albums/cc149/bbrad20/ControlPanel.jpg
http://i219.photobucket.com/albums/cc149/bbrad20/ResistorTerminal.jpg
http://i219.photobucket.com/albums/cc149/bbrad20/Signalterminal2.jpg
Steve,
Thanks for the follow up, looks like you are having a great time! I saved this in the computer for future reference (I have collected quite a bunch of stuff this way...)
Thanks,
Charles
Hi Charles,
Yes making the signals was fun although it was a lot of wires. Regarding the attached data it is for everybody to use, however using the photobucket location may not be the best way to pass info on. Maybe some one could suggest another way or location were I could put powerpoint slides that can be modified for further use.