Text only | Text with Images

Bachmann Online Forum

Discussion Boards => General Discussion => Topic started by: dgdaigle on January 09, 2014, 04:37:22 PM

Title: Using Bachman EZ Command booster with digitrax command system
Post by: dgdaigle on January 09, 2014, 04:37:22 PM
I would like to hear from someone about the performance and any issues in using an EZ Command 5A booster with a Digitrax DCC Command system.
Title: Re: Using Bachman EZ Command booster with digitrax command system
Post by: Doneldon on January 09, 2014, 09:37:31 PM
dg-

It should work. You can't mix controllers, throttles or command stations but boosters are pretty much interchangeable. I would check the prices of all manufacturers' boosters before buying one as the prices
are all over the map.
                                   -- D
Title: Re: Using Bachman EZ Command booster with digitrax command system
Post by: bapguy on January 10, 2014, 03:13:24 PM
What Digitrax system are you using? And how big a layout do you have? Number of DCC engines you plan on running and do any have sound?  Joe
Title: Re: Using Bachman EZ Command booster with digitrax command system
Post by: Doneldon on January 10, 2014, 07:34:13 PM
Quote from: bapguy on January 10, 2014, 03:13:24 PM
What Digitrax system are you using? And how big a layout do you have? Number of DCC engines you plan on running and do any have sound?  Joe

bap-

Five amps will give him plenty of power unless he plans to operate a bunch of older engines
with sound and a fleet of passenger cars with incandescent lights.
                                                                                                     -- D
Text only | Text with Images