I haven't been here for a while & apologize if this was covered. Does Bachmann make coupler boxes for the new sprung couplers? I would like to use them on scratch built HOn3 rolling stock as well as on some N scale....thanks
Jerry, you should be able to get them from the parts department. If not, I would try Microtrains.
Jerry,
You can make coupler boxes from K&S Engineering 8262 Rectangular Brass Tube 3/32" X 3/16" X 12" . Plastruct also makes a styrene tube with the same measurements. I have made body mounted coupler boxes from them using the Bachmann E-Z Mate couplers (long, medium & short). Regardless of how you get or make your boxes, you will need a good coupler height gauge, I use the Micro Trains 988 00 031 Coupler gauge.
Jerry,
Here is a link that may answer all your questions
www.therailwire.net/forum/index.php?topic=21980.0