Print Page - DCC ON BOARD

Title: DCC ON BOARD
Post by: runningbear on February 19, 2011, 06:38:22 PM

What is the default CV# for Bachmann Diesel locomotives

Title: Re: DCC ON BOARD
Post by: ACY on February 19, 2011, 06:53:59 PM

It comes programmed to respond to address 3.

Title: Re: DCC ON BOARD
Post by: Jim Banner on February 19, 2011, 11:51:31 PM

runningbear,

Are you asking which CV to use to reset the decoder to its factory (default) settings? While the default value of CV1 is 3, that does not answer that question. And if the document Hunt linked to has that information, I was unable to find it. Not all decoder have a reset CV and perhaps this is one of them.

Jim

Title: Re: DCC ON BOARD
Post by: runningbear on February 20, 2011, 09:27:08 AM

Thanks for the input guys, CV 8 + 8 did the trick thanks again.

Bachmann Online Forum

Discussion Boards => General Discussion => Topic started by: runningbear on February 19, 2011, 06:38:22 PM