Print Page - Switch control box

Title: Switch control box
Post by: philws on April 28, 2015, 08:30:02 AM

I just set up 4 new #4 switches and two do not work.What can I do?

Title: Re: Switch control box
Post by: jward on April 28, 2015, 10:01:28 AM

first determine whether the problem is in the switch or the control box. plug the switch into one of the control boxes you know is working and see if it will work.

Title: Re: Switch control box
Post by: philws on April 28, 2015, 10:30:08 AM

I did, I tried it on the 2 that worked and it still didn't work.

Title: Re: Switch control box
Post by: Jerrys HO on April 28, 2015, 05:22:36 PM

philws,
Make sure the plug is seated all the way in the control box. I had one with that issue andd finally started wiggling and pushing on the plug and it started working. The plug was super tight going in the box like it was too big.

Title: Re: Switch control box
Post by: jbrock27 on April 28, 2015, 10:58:18 PM

Sometimes things, even new things, need tweaking ;)

Bachmann Online Forum

Discussion Boards => General Discussion => Topic started by: philws on April 28, 2015, 08:30:02 AM