Speaking of smoke KM1 is doing awsome with the dynamic smoke

http://www.youtube.com/watch?v=WW0iGOSuVvg

Its only $4099.00 for those with that kind of money

https://www.flickr.com/photos/86150435@N04/13969345617/

im still not use to my new computer it automatically put the [img] thing in to my url

So i got these on30 from my club(we are located next to the U.P. tracks) and i would like some ideas for what to do. Im going to be be hidding the ties and make it Ho instead. but i would like some ideas.

I removed the gears from the moving eye the make the faces replaceable with magnets so i can take them places and have a adult and child version https://www.flickr.com/photos/86150435@N04/14114416651/

SO today i got my Devious Diesel  and after installing dcc i decided to try to to improve the 3 pole  power and performance. i have been working with neodymium magnets for uncoupling and replaceable parts on locomotives. i put some on the side of Diesels motor and it seems to be working better by at least 25% if not 35%, i also removed the gears ti the eyes all 5 of them.

the redhead may be a good replacement but a tcs micro led should work great. plus you gave me an idea to tell which way is forward on my little rust bucket

i have a devious diesel that is going to be converted into a LNER DES1 i need a screen that can be cut down  and place magnets to make diesels face removable. any ideas on where to get the radiator  screen i need?

i took out the pc board an put us a 9 pin wiring harness and a dh123 because the one that was in it ran poor.

The photo posting on here doesn't work with my new laptop its just frustrating. I'm thinking of salty next, partially because of the 5 pole motor in him like Mavis has.
https://www.flickr.com/photos/86150435@N04/sets/72157644229226625/

I put a Tsunami tsu-750 645 in Mavis, mostly for show to the kid who view the stores layout. it only took about 15 minutes with disassemby  of gear box from the wheels.

https://www.youtube.com/watch?v=s5gjWpbuZVg

That is completely different from what my tsunami sound guide says, it says turn cv116 to 0 to turn off auto notching or set
cv116 to 1-15 for  the number of speed steps before the engine notches up again.  it was that easy to program my class 03 manual notching.

Try it i never have used it. I don't Think it will stick to the plastic though.

Pva(white Glue), some use liquid nails or silicone caulking.

http://www.tcsdcc.com/public_html/Customer_Content/Installation_Pictures/HO_Scale/Bachmann/Toby/toby.htm
You could fit some nice Digitrax dcc system

Any one have any luck on bending track for a incline quarry?