Print Page - HHP-8

Title: HHP-8
Post by: josephw98 on September 23, 2012, 01:13:45 PM

Hello,

I recently purchased a DCC Ready Bachmann Spectrum HHP-8. I was wondering which decoder Bachmann uses/recommends and where I can purchase it.

Thanks,
Joe

Title: Re: HHP-8
Post by: Len on September 23, 2012, 02:25:14 PM

I used a TCS T1 decoder per the instructions here:

http://www.tcsdcc.com/Customer_Content/Installation_Pictures/HO_Scale/Bachmann/HHP-8/bachman_hhp_8.htm (http://www.tcsdcc.com/Customer_Content/Installation_Pictures/HO_Scale/Bachmann/HHP-8/bachman_hhp_8.htm)

Works very well. I suspect a Digitrax DH163 would also work.

Len

Title: Re: HHP-8
Post by: Bucksco on September 23, 2012, 08:50:07 PM

How about a BACHMANN decoder in your BACHMANN engine....

http://www.bachmanntrains.com/home-usa/products.php?act=viewProd&productId=1466

Title: Re: HHP-8
Post by: josephw98 on September 30, 2012, 02:39:08 PM

What is the difference between http://www.bachmanntrains.com/home-usa/products.php?act=viewProd&productId=3387 and the one you posted?

Title: Re: HHP-8
Post by: Bucksco on September 30, 2012, 11:06:34 PM

The size/footprint of the decoder. The one you listed if a smaller version. Either should work.

Bachmann Online Forum

Discussion Boards => HO => Topic started by: josephw98 on September 23, 2012, 01:13:45 PM