Do the current Bachmann GE 44T and GE 70T switchers share the same chassis? Do they have the same trucks and truck wheelbase, and is the distance between the trucks the same? I am looking for a good powered chassis in this size range for a Diesel critter project. Is there any reason to choose one over the other?
Dick Moessner
The 70 ton is about 1/8 inch longer than the 44 ton. Both are different for frame and trucks. Both run very well.
Below is a photo of the 44 ton parts list.
(http://i912.photobucket.com/albums/ac323/lexonew/Spectrum44tonB.jpg)
Below is a photo of the 70 ton parts list.
(http://i912.photobucket.com/albums/ac323/lexonew/70tonsheet2.jpg)
Download the photos and use a photo editing application to view the photos. You can expand the photos to get a better look.
Lex
Or better yet, go to:
http://www.bachmanntrains.com/home-usa/references.php (http://www.bachmanntrains.com/home-usa/references.php)
and get the originals.
the 70t has larger diameter wheels than the 44t, the trucks are longer and taller on the 70t, and generally everything is larger. The frame is also a little taller and wider. So, if you're wondering "Can I put a 44t shell on a 70t frame?" the awnser is no. While you technically can fit a 70t shell on a 44t frame, it will not look or work right.