I'm rebuilding my HO layout. I'm planning on buying EZ Track and using 26" and 28" radius track. In your descriptions, you never mention the width of EZ Track. This is a problem! I have planned to use some bridges and don't know if they (EZ Track will fit inside the width of the bridges). I'm use to dealing with production descriptions in the following manner, Width, length and height.
The width of HO EZ-Track is just a hair under 2".
The lack of critical track dimensions is frustrating to us all.
Hope this helps.
Free the 2" Straights !
Sincerely,
Joe Satnik
After I posted this message I had a chance to read more posts. For bridge and trestle track is there adapters to use regular code 100 snap track with the EZ track? Also is there electrical insulators for EZ track?
The main reason for choosing EZ track was the larger radius!
Thank you Joe for your timely response!
Kaylon
nothing special is needed to connect EZtrack to regular track . Use regular couplers including the insulators.. You don'thave to run the EZtrack through the bridges just connect the EZtrack to the bridges.
Don