Is there a way to increase the volume?
It might not be obvious, you need a DCC system to program these settings.
Also, most DCC systems need a booster on their programming track. I do not know if the shay responds to POM.
One last tip, you can buy the QSI programmer for under $100, apparently it can program the Quasinami.
Regards, Greg
I have the DCC-&-Sound-On-Board version of the 3-Truck Shay myself; CV 128 is the master volume control. I have it set to it's maximum value (I think 256, if I remember correctly). It's NOT as loud as my Phoenix 2K2 & P5 sound boards, but loud enough that I consider it acceptable; I live in a very densely-populated neighborhood, am on good terms with the neighbors (they LOVE watching the trains!), so I try NOT to emulate the teenagers with the 130 db. "boom cars"! :o >:(
If your DCC system has "program on the main" capability, you do NOT need a special "programming booster" to adjust this CV.
As the System comes, the exhaust rate is way to slow for a Shay, so you may also want to adjust CV116 (Auto Exhaust rate) to it's maximum value of 255. This will give a believable fast Shay exhaust rate.
Here's a video of mine in action...(running on DCC - which is why the smoke is so great as well!). :)
http://www.youtube.com/watch?v=hz9m0LUCJ0g (http://www.youtube.com/watch?v=hz9m0LUCJ0g)
;) Tom