Print Page - Turn out indicator lights

Title: Turn out indicator lights
Post by: Ray Z on June 20, 2021, 12:37:33 AM

I am using EZ track and have several turnouts. Is there a way to wire indicator lights so that I know which direction the track is switched.

Thanks,
Ray Z

Title: Re: Turn out indicator lights
Post by: jward on June 20, 2021, 03:08:05 PM

It is pretty easy to do using an Atlas Snap Relay, following the instructions included with the relay. But in order to do so, you will have to cut and splice the plug n play wiring supplied with your EZ track. https://moreleds.com/nds2.pdf

Title: Re: Turn out indicator lights
Post by: Hunt on June 20, 2021, 03:51:08 PM

Click Here (http://www.circuitous.ca/5ToggleTwin.html) Twin Coil Switch Machine Driver Circuit

Title: Re: Turn out indicator lights
Post by: Ray Z on June 20, 2021, 09:41:35 PM

Thanks guys!

Title: Re: Turn out indicator lights
Post by: Hunt on June 21, 2021, 06:03:55 AM

Quote from: Hunt on June 20, 2021, 03:51:08 PM
Click Here (http://www.circuitous.ca/5ToggleTwin.html) Twin Coil Switch Machine Driver Circuit

Bachmann uses three terminal twin coil switch machine in their turnouts. The Bachmann turnout green 3-wire -- middle wire is common.

Bachmann Online Forum

Discussion Boards => HO => Topic started by: Ray Z on June 20, 2021, 12:37:33 AM