Does anybody have a web site to go to get a PDF Instruction manual for a DC Controller  item number #46605A. Thank You in advance.

Thank you for all the info. I do have one more question and I know this a Bachmann forum. I have the Bachman 5 amp booster and a Bachmann reverse loop module. I'm thinking of buying a Digitrax Zephyr Xtra Starter set controller. My question is will my Bachmann stuff work with the Digitrax system? I have asked Digitrax support people and did not receive a answer, because they did  not know about the Bachmann systems, but was told they think they will work. Is it compatible?

Is it possible to order Item # 44902 (E-Z Comand Digital Command Control System) DVD and printed instructions? I ether misplaced mine or did not receive them.

Thank You for the info. I have inventoried my Bachmann equipment. I have the following: 1-#44902 E-Z Command Control System, !-#36507 E-Z Command DYNAMIS Wireless Handset, 1- #44912 E-Z-Command 5 Amp Reverse Loop Module, and 1- #44910 E-Z Command 5 Amp Power Booster. As I said earlyer I plan to have at least 20 Loco's with me controlling 3 or 4 at a time. I do not plan to get any bigger in the future. Do I have enough equipment and/or would Digitrax equipment work better? I would attach my layout, that I laid out on RR-Track Software, but I do not know how to attach.
Thanks again for comments

I am about to build a layout. I want to operated it as a DCC controlled layout. The equipment I have is all Bachmann. I was at a train show in Lacrosse today and talked to a club, which is run with DCC control. The member tells me That I should use "Digitrax" equipment, that it is the best and will allways work with old equipment as they upgrade their equipment. How do you all feal about this? I plan to have about 20-25 loco's which I would run at the most 4 at a time. I don't think that I need an costly system. Thoughts?

Thank You for the information, if there is anything else, I will thank You in advance. John

Can the Tortoise machines be used on Bachmann Turnouts? If yes, are there any articles with pictures/instructions available? I have both DCC controlled and remote controlled switches. I'm thinking on converting just the non DCC switches with the Tortoise. Does this make any sense?

How about adding a few DDC loco's

A "quick connect" used by club's moving there layouts around, where can I find these, for tracks not wiring. Thanks again.

I am building a layout where my table will have 3 splits. I want to make connections between the splits. Is there hardware to connect the tracks at the splits and also the wiring, with connectors, under the table. Thank you in advance for any answers given.

I'm building a small HO layout for under the Christmas tree. I will have a small mountain, and I want to make it a winter scene. What is the easy way to make snow or what company has snow, or can I make my own snow.
Thanks for the help, John

I found this item in Caboose Hobbies INC. When will this item be available  at other stores? Where can it be bought on line today, if available?
The item contains 2 each of  .75, 1.00, 1.25, 1.50 and 2.00 E-Z gray track connectors.
Thank You

Thank You all. I will keeping watching for more tips, if there are any.

I have a layout software and I been using EZ track except were I need special lengths and curve,s to fit, then I use the Atlas library that has software to cut straight and curve track. The question I have can I cut EZ track to lengths and curves and will they fit with standard EZ track? Is there a method to connect these tracks?

thank You for the info and the two sites about turntable rework and build. The info is great, maybe I will try one of them in my spare retired time.
John