Hello everyone, Happy New Year.
Need help on replacing the front light and making it work.
1- the front light was not working I removed it and tested with 12 volt and of course it burned out, I have the replacement bulb but I cant see how the housing comes apart without destroying it.
2 - temporally connected a new bulb but also is not working. Must be a loose connection or an electronic failure.
Please help, pjf
I can't remember ever seeing a lightbulp in a 2-8-0.
It always came with LED's
A LED is something completely different than a lightbulp.
12V will absolutely distroy a LED.
A common LED uses 20 mili amps current.
A led also has polarity +/-
The lens of the housing should slide out but sometimes it is glued in place.
Ton
Ton, thank you for your reply. I did figure it out after connecting it to 12 volts.
My replacement "light bulb" is a LED and I got it working. Now I will try taking apart the housing without destroying it. Cheers, pjf