Help!!
I have a short in my 2-10-0...I had to replace the board and I'm quite sure I put it back in correctly...The black wire went to the lead truck, the red to the back. Neither truck connection is touching the tender weight. The large connection to the loco is on the left the small on the right. Looking at the front of the tender. The insulated wheel sets are on the left, again looking at the front of the tender....This new board was purchased from Bachmann. The loco was not altered in any way..I'm REALLY confused....
Thanks, Steve
Sound like a tender truck shorting issue. Hopefully at least as it's easy to solve.
Just try turning the trucks around. Try different combinations. I can't recall which sideof the truck is which but a little experimentation may solve the problem.
Thanks for the reply,
Yep I've tried the trucks from both sides of the rail. Still a dead short.....
The tender wheels are to be opposite one another. The front truck insulated on one side, the back truck the other. The tender picks up current from both rails.
Thanks guys,
Okay so I've always had steamers that the loco picked up current from one side of the rail and the tender from the other side...
Old dog new trick...
Thanks again......
did you fix it?
Sorry....Yes it works like a charm......Now to get DCC and sound in it........