Have new GP9 w/DCC. Have removed shell, but need to remove cab to re-install windows. Cannot figure out how to detach cab from body. Please help.
Aw, c'mon. NOBODY knows how to get the cab off? That's very surprising. Next comes dynamite!
Maybe you might be the first one to do this.
You might also ask at the Kalmbach Model Railroader forum but be sure to mention you asked here with no responses.
Good luck.
Rich
Look at the exploded diagram here:
https://www.bachmanntrains.com/home-usa/dwg/dwgs/HO_GP9_DCC.pdf
About 3/4's of the way down where the cab attaches you'll see small squares where the front and rear cab walls would slide down. Those are for small tabs on the inside edge of the front and rear walls. I haven't opened mine in a while, so I don't remember if you can push the tabs out from inside the shell, or if you have to pry the cab slightly away from the shell to release the cab.
Either way, the trick is to release the tabs and carefully lift the cab off. Reverse to reinstall.
Len
Figured it out. Difficult, but do-able. Thanks.