Hello I am making a mold for a rock wall. What can you use for mold release other than the $10 can from micro-mark? Any suggestions?
Thanks
Click on the link below. You will find plenty of links. Store the links you like in Favorites. Some may have PDF downloads and no doubt you will find some other forums that you might join. There are some forums dedicated to doing scenery.
http://tinyurl.com/5wz3h8l
Rich
What type of mould release you need depends in part on what you are pouring into the mould. If it is plaster of Paris, for example, you don't need any mould release at all.
Jim
I spray my molds with a little water mixed with a few drops of dish soap, then shake them to get any extra water off they release a little better then just a dry mold. I have never seen any difference in results when applying the pigments to the rocks after using soapy water as opposed to nothing.
NM