Bachmann Online Forum

Discussion Boards => HO => Topic started by: Anthony P2 on March 08, 2010, 04:51:56 PM

Title: K4 pacific
Post by: Anthony P2 on March 08, 2010, 04:51:56 PM
I got my K4 pacific locomotive for this past Christmas, and i love it!  ;)  I was wondering what type of sound unit do you guys use? Because when i went to your service department in the summer there was a K4 with sound. and what would the best smoke unit for it? thanks.
Title: Re: K4 pacific
Post by: ABC on March 08, 2010, 06:19:20 PM
For sound go with Tsunami, and I do not advise installing a smoke unit, as it will prove to be a bad a idea, especially since you are running DCC and it makes your track dirty and DCC locos are more sensitive to this.
Title: Re: K4 pacific
Post by: Anthony P2 on March 08, 2010, 07:05:13 PM
thanks ABC  ;)
Title: Re: K4 pacific
Post by: ebtbob on March 10, 2010, 07:54:26 PM
I agree,   NO smoke unit.   I also agree with the Tsunami.   The Light Steam should suffice.
Title: Re: K4 pacific
Post by: Anthony P2 on March 12, 2010, 01:38:10 PM
i just looked on their website and they don't have the sound for a K4. i saw others like K27, but i didn't see K4.
Title: Re: K4 pacific
Post by: richg on March 12, 2010, 01:50:47 PM
Quote from: Anthony P2 on March 12, 2010, 01:38:10 PM
i just looked on their website and they don't have the sound for a K4. i saw others like K27, but i didn't see K4.

SoundTraxx has different steam decoders. Go back and look. Might be light steam or medium steam.
The Tsunami Micro will work just fine though a standard Tsunami might be easier to install. Measure the tender and look at the decoder sizes. I have looked at the diagram. Not a problem.
Take your time and you will gain a lot of experience.
I use the Micro Tsunami light steam in the Spectrum 4-4-0 and 4-6-0.

Rich
Title: Re: K4 pacific
Post by: Barney R on March 13, 2010, 12:41:42 AM
This is from the Soundtraxx web site-
K4 4-6-2 Pacific TSU-1000 Medium Steam 826102 810054/ 810110

Here is the page-http://www.soundtraxx.com/choose/step3.php?t=ho&s=Bachmann
I knew I saw it once when I had the same question.

Barney
Title: Re: K4 pacific
Post by: ebtbob on March 13, 2010, 08:25:52 AM
Anthony,

      Go with either the light or medium steam Tsunami.   The K27 you saw is a narrow gauge 2-8-2.
Title: Re: K4 pacific
Post by: Anthony P2 on March 13, 2010, 08:43:59 AM
thanks guys. o by the way are these easy to install?
Title: Re: K4 pacific
Post by: ABC on March 13, 2010, 01:04:06 PM
If you can use a soldering iron well, and are familiar with the wiring it won't be exceptionally difficult. The hardest part will be finding a good set-up for the speaker and baffle.
Title: Re: K4 pacific
Post by: Clear Block on March 13, 2010, 07:34:47 PM
Not to throw this off topic, For the time being I have 7 Bachmann K4s and All are using the Stock Bachmann Decoders with NMRA 8pin plug.
In Analog and now in DCC, the engine headlight seems to be dull/almost non existent.
Has anyone here ever replaced their stock headlight with a different bulb, perfectible a golden white LED?
4-Prewar
3-Postwar
on a side note; These engines look magnificent with the Con-Cor mP54s