Does anybody have any ideas about what is a good way way to securely mount the 2" square black turnout switch control boxes that control Bachmann #5 and #6 E-Z track turnouts on a layout? I don't really want to glue them down (and you can't screw them down because of the size of the circuit board)) so I am interested in hearing from anyone about how they handled this issue. I am considering making some sort of mounting bracket and, so far, that appears to be the only option.
Thank you in advance for your response.
Check out double sided servo mounting tape at the hobby shop. Cut tiny pieces for corners of boxes, it's very sticky, but can be removed carefully with a #11 blade.
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXK199&P=0
You might consider mounting the switch boxes on a separate thin panel of some kind, then fasten the panel where you want it.
Another option is Velcro, I use it for all types of removeable mounting tasks.
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXK203&P=M
Your suggestion was perfect! I used Scotch 2-sided heavy-duty mounting tape that I got from Home Depot and it worked fine.
Thank you.
You're welcome Brad,