My 2-8-0 engines DCC 4 wire power plug to headlight and motor has a wire pulled out of it . how can I get it fixed.
T34 :)
Contact service at Bachmann. Had the same problem. They will send you a new set of wiring/pickups. Stephen
Stephen,
Ive all ready had that problem and ordered that part and fixed it. I'm talking about the 4 pin plug to motor and headlight on my DCC equipped spectrum B&O 2-8-0.
T34 :)
Quote from: T34 on November 03, 2009, 06:57:42 PM
Stephen,
Ive all ready had that problem and ordered that part and fixed it. I'm talking about the 4 pin plug to motor and headlight on my DCC equipped spectrum B&O 2-8-0.
T34 :)
you can order that part also. get the two pin plug while you are at it. i have ordered both in the past. i asked on the bachmann website what i needed, they sent the two plugs with wires and just billed me. sent a check in afterwards. cost was under ten dollars.
lex
I did that to a 2-10-2 and iliked the machine somuch,I bought another one and reverse engineere the wires.But my eyes aren't that good anymore. I kept a "diary "of allthe wires so I have a record next time something like that happens. I imagine BACHMANN would not change wire diagrams for different locomotives.