Anyone know if FOAM CORE BOARD is suitable for model railroad scenery? I am planning to use it as a base for my layout and use some for my mountains.
I think so, a good number of people use it for their layouts.
If you are talking about the thin 'foam core' board used for signs/artists then it is not sufficient for the base. You need the 1 1/2" to 2" thick insulating sheets sold by the big box stores.
Do you know where I can find the insulation foam and do you know how much it costs?
Check places like Lowe's, Home Depot, or building supply stores. If you live in a Northern state, it's easier to find than if you live in a Southern state.
I am/was planning on using Rigid Insulatoin boards from Home Depot. The 2" thick 2ftX8ft board looks like a winner. This will allow me to dig down (for culverts and roads) as well as a possible grade increase for the track.
Michael - I use foamcore (the sign/artist variety) for numerous purposes (structures, building bases, transfer tables); having said that, I would not recommend foamcore for a layout base on anything but a micro-layout. As was suggested above, Styrofoam is the material of choice. If you live south of the Mason-Dixon Line, 2" Styrofoam sheets are difficult to find. This isn't a problem as one can stack two 1" thick sheets for the same strength/effect. Styrofoam will require considerable support. I suggest you check the Model Railroader (Kalmbach Publishing) website for a book on benchwork construction.
Good luck,
Ray
to expand on what ray said in his post above, many use the 2" foam for layouts. you'll probably want to put a sheet of plywood underneath for support and protection, and i'd also protect the edges with wood as well.
somewhere on this site, i don't have the exact link handy, is a series of photos detailing the construction of a foam base layout by the bach man himself. perhaps somebody could supply the link?
woodland scenics sells layout kits based on foam board and risers.....
Artist foam core board will curl and or shrink if you get one side wet with paint or while glueing down scenery on a large area. Unfurtunately I learned this the hardway.
NM
Thanks everyone! I called up Home Depot near my mom's house. They have the insulation board, so when I go home I will pick up some board there! Thanks for all the tips!
This is the Bach-man's layout from the Photo Gallery http://www.bachmanntrains.com/home-usa/gallery.php?set_albumName=album13&include=view_album.php (http://www.bachmanntrains.com/home-usa/gallery.php?set_albumName=album13&include=view_album.php)
Make sure you get the Extruded Polystyrene Rigid Insulation, its either pink or blue and not the compressed styrofoam board. Its not strong enough and does not cut well. To glue the polystyrene use PL 300 glue also found at Homedepot.
Dave
It doesn;t cut well? Could it be cut into a 4X6 instead of a 4X8?
The compressed styrofoam board does not cut well, it is composed of styrofoam beads and it crumbles. The Polystyrene cuts great.
Dave
Michael - I agree with Dave. Stay away from the white "bead board".
You will end up with little white styrofoam beads everywhere. I speak from experience.
My Home Depot carries the 2'' thick pink polystyrene insulation sheets in the 4x8 ft size for about $25. This is the kind to use as it cuts with little mess and is quite rigid. I use it for everything from base to building hills/mountains. I invested in a "Hot Wire Foam Factory" cutting and carving set years ago. It makes working with(cutting, carving) foam insulation a breese. I am a big advocate of foam for scenery....you can build a mountain on your workbench (in my case, old kitchen table) and set it on the layout when finished. Sure beats bending over the layout trying to work on it. Try it...I think you'll like it. Every Lowes and Home Depot in Georgia carries it, as it is a common building product.