Text only | Text with Images

Bachmann Online Forum

Discussion Boards => On30 => Topic started by: Linzthom on January 27, 2010, 06:30:48 PM

Title: Bachman dcc decoder question
Post by: Linzthom on January 27, 2010, 06:30:48 PM
To those who know about these things,

I want to add a dcc decoder to my Climax. If I add a Bachman 8 pin plugged decoder to the loco will I still be able to run it on a dc layout as well without frying the decoder? And will it improve the operation of the model? The lokey is dcc ready ( and waiting)

Thanks

Lindsay

http://heisler.webs.com
Title: Re: Bachman dcc decoder question
Post by: JohnR on January 27, 2010, 08:56:34 PM
Lindsay -

First, yes DCC decoders will work on DC.

You asked about improved operation.  What exactly are you seeking to improve?

-John
Title: Re: Bachman dcc decoder question
Post by: Linzthom on January 27, 2010, 10:05:42 PM
That should have read : could it improve slowspeed running.

Thanks for the imput.
Title: Re: Bachman dcc decoder question
Post by: Tomcat on January 27, 2010, 11:47:15 PM
Hi there,
more or less - not. The slow speed improvement with the Bachmann DCC decoders is pretty poor; I can state that all my Engines after installing Tsunami or ESU Loksound decoders were much better running and controllable, preferably just in low speed settings...

Cheers, Tom
Title: Re: Bachman dcc decoder question
Post by: JohnR on January 28, 2010, 12:23:46 PM
Adding a DCC decoder will not improve any running characteristics under DC control. 

The Bachmann decoder is a very low-end decoder.   There are other low cost, non-sound decoders on the market with superior speed control.   

-John
Title: Re: Bachman dcc decoder question
Post by: Linzthom on January 28, 2010, 03:06:44 PM
Thanks for that, guys. I have ordered a Bachman decoder so will have at least a  dcc equipped Climax if I decide to sell it or get a dcc system sometime in the future. 
Text only | Text with Images