Text only | Text with Images

Bachmann Online Forum

Discussion Boards => HO => Topic started by: cptfreddyt on July 28, 2010, 11:26:30 PM

Title: what is required to install a tsu-1000 in a 2-8-4 loco
Post by: cptfreddyt on July 28, 2010, 11:26:30 PM
I am attempting to install a Tsunami sound decoder in a bachmann Berkshire loco,sound is OK but it won't run :P anyone have a clue?
Title: Re: what is required to install a tsu-1000 in a 2-8-4 loco
Post by: richg on July 29, 2010, 04:50:15 PM
Follow the instructions in you DCC controller manual and the Tsunami manual. The proper way to install and use the decoder is very clear. It has worked for me with all the installs I have done.

Rich
Title: Re: what is required to install a tsu-1000 in a 2-8-4 loco
Post by: cptfreddyt on July 29, 2010, 04:57:02 PM
Thanks Rich,I'll do just that.I haven't had the problem in the past it might be my error.
Title: Re: what is required to install a tsu-1000 in a 2-8-4 loco
Post by: richg on July 29, 2010, 06:59:15 PM
You have not said which controller you are using. "It won't run" does not tell us much.

Rich
Title: Re: what is required to install a tsu-1000 in a 2-8-4 loco
Post by: cptfreddyt on July 30, 2010, 01:04:29 AM
Sorry for the oversight I have two systems on seperate layouts,a NCE pro cab for HO scale and Digitrax Chief  n scale and can't get it to run with either one.I have noticed after close examination there is a trouble code on the decoder after I research the trouble light I'll get back with you.
Text only | Text with Images