Bachmann Online Forum

Discussion Boards => HO => Topic started by: OLD BILL on October 27, 2010, 12:24:03 PM

Title: RS3 horns
Post by: OLD BILL on October 27, 2010, 12:24:03 PM
     Sori guys and gals.

      What I meant was the horns that would be on the models shell as manufactured.

     old bill
Title: Re: RS3 horns
Post by: richg on October 27, 2010, 12:51:45 PM
Ok, that is much better.
Your first question comes under the category of, My trains do not work, Whats wrong?  ;)

Do some Google searching. It might depend on the railroad preferences. Many railroads had different horn requirements and no doubt some loco manufactures might have had a default horn type that was included with the loco.
With searches, you can usually develop some good links to store in Favorites and increase your modeling knowledge quite a lot.
Ok, I do not have any info about this specific issue but I have found over the past few years, that sometimes I get opinions from others that are not correct. With the search method, I most of the time have correct info.
Yes, you might have to wade though other links that are not really related but then, you never know what you might find.

I use the two below search engines.

http://www.yahoo.com/

Google usually does better. Don't bother with, Im feeling lucky.

http://www.google.com/webhp?hl=en

Rich
Title: Re: RS3 horns
Post by: richg on October 27, 2010, 06:59:15 PM
It would help if you can post a link to a particular model of a RS3 or a photo of one you are interested in.
Some RS3's I have seen had a single horn but do not know what type of horn.

Rich