Print Page - HELP WITH E-Z COMMAND CONTROL CENTER

Title: HELP WITH E-Z COMMAND CONTROL CENTER
Post by: vago_183 on February 12, 2011, 01:28:04 PM

I HAVE 4 LOCOMOTIVES AND I FOLLOWED THE STEPS IN THE VIDEO ON HOW TO PROGRAM YOUR LOCOMOTIVES AND IT WORKED FOR 2 OF THEM BUT THE OTHER 2 WHEN I TRY TO PROGRAM THEM THEY JUST TURN ON THE LIGHT AT THE TRACK BUT WONT PROGRAM OR MOVE OR ANYTHING....

Title: Re: HELP WITH E-Z COMMAND CONTROL CENTER
Post by: daxdog on February 12, 2011, 01:40:14 PM

I know that some locomotives won't program correctly without a controller which supports a separate programming track. Are these Bachmann locos or some other brand?

Title: Re: HELP WITH E-Z COMMAND CONTROL CENTER
Post by: vago_183 on February 12, 2011, 01:42:00 PM

ALL OF THEM ARE BACHMANN

Title: Re: HELP WITH E-Z COMMAND CONTROL CENTER
Post by: vago_183 on February 12, 2011, 02:01:14 PM

I TRIED THAT BUT ONCE I SET IT ON THE TRACK AND TURN IT ON IT WONT RUN OR ANYTHING AND THE LIGHT INSIDE THE LOCOMOTIVE COMES ON

Title: Re: HELP WITH E-Z COMMAND CONTROL CENTER
Post by: vago_183 on February 12, 2011, 03:17:07 PM

NO IT WONT LET ME CONTROL IT OR ANYTHING

Title: Re: HELP WITH E-Z COMMAND CONTROL CENTER
Post by: Doneldon on February 12, 2011, 07:19:51 PM

Vago-

Just for the record, all caps is used to signify yelling.

-- D

Title: Re: HELP WITH E-Z COMMAND CONTROL CENTER
Post by: srevac on February 13, 2011, 12:51:39 PM

Quote from: Doneldon on February 12, 2011, 07:19:51 PM
Vago-

Just for the record, all caps is used to signify yelling.

-- D

Very good point. Very annoying. Someone should also train the e-bay sellers. R.

Title: Re: HELP WITH E-Z COMMAND CONTROL CENTER
Post by: flyfisher on February 19, 2011, 10:33:57 AM

I had thhat problem Make SURE ALL other engines are off the track!

Bachmann Online Forum

Discussion Boards => HO => Topic started by: vago_183 on February 12, 2011, 01:28:04 PM