Anyone know where the 2 jumpers go on the PCB board. I took them off but don't know where they go to put them back. Had it running DCC and now changing it back. Ron
http://www.bachmanntrains.com/home-usa/dwg/dwgs/N821X-IS001.PDF
Thanks for the info.
I also found a picture I took when the loco was apart waiting for the DCC install. Problem is today the loco died. I put about 2 hours into finding the problem and than removed the DCC and changed it back to original but it still won't run. It was loco #61 in DCC but when I removed the DCC it should just be 00. Will not run! Is there a schematic for these locos to double check wiring? Thanks Ron