Hi,
I have a new DCC setup and I'm using Bachmann N scale E-Z track. I setup the following layout using all E-Z tracks and it shuts down my DCC system. If I remove the turnouts and just use a single loop, everything works great, but if I add the turnouts my DCC system shuts down. The turnout packaging talks about not powering the frog for DCC, but two of them appear to be powered. I bought three turnouts and one of them has a frog that's not powered, but the other two appear to be powered. How do I remove power from the frog?
All of the turnouts are item# 44861 and 44862
Here's a picture of the powered frog:
(http://i43.tinypic.com/ff094z.jpg)
Here's a picture of the unpowered frog:
(http://i41.tinypic.com/kamlmw.jpg)
Here's a picture of the layout I tried:
(http://i42.tinypic.com/2afeejk.jpg)
Thanks for the help,
George
Have you tried asking this question in the N-scale section of this forum? That is where the N-scale experts hang out.
Jim