I have a pair of DCC on Board locomotives, a GP35 (60704) and a GP40 (60306). On the UK Bachmann website there is a DCC OnBoard locomotive manual (http://www.bachmann.co.uk/pdfs/DCC_onboard_general.pdf) that lists the following functions:
F0 Locomotive directional lighting
F1 180mA auxiliary output
F3 Shunting speed reduction selection
F4 Inertia on/off
Are these functions available on my locomotives? F3 and F4 dont appear to do anything.
F10 toggles directional lighting and F1 Toggles dimming (Using an E-Z Command controller). Are there other functions available with these locos? Is there a document that describes the functions that are available?
Thanks
Peter
That is the worst decoder info sheet I have seen to date!
Jim