Text only | Text with Images

Bachmann Online Forum

Discussion Boards => HO => Topic started by: HCBJRHOS on May 29, 2012, 12:53:51 AM

Title: 8 pin item for DCC ready HO Maintenance Vehicle Ballast Regulator
Post by: HCBJRHOS on May 29, 2012, 12:53:51 AM
What pin do I use to make my  Bachmann DCC ready Ballast Regulator Vehicle DCC?
Title: Re: 8 pin item for DCC ready HO Maintenance Vehicle Ballast Regulator
Post by: richg on May 29, 2012, 02:24:20 PM
Below is the instruction sheet that comes with the regulator. Very clear on how to connect the decoder. I call the Bachmann method, The Wordless Workshop.

http://www.bachmanntrains.com/home-usa/dwg/dwgs/16947.pdf

Rich
Title: Re: 8 pin item for DCC ready HO Maintenance Vehicle Ballast Regulator
Post by: richg on May 29, 2012, 02:27:48 PM
Use the DZ125 deocoder it is small. Make sure to insulate the unused wires. I use the DZ125 in a couple other HO locos.

Rich
Text only | Text with Images