Text only | Text with Images

Bachmann Online Forum

Discussion Boards => HO => Topic started by: polekat62 on August 08, 2012, 01:08:01 PM

Title: 3 -truck Climax - truck removal
Post by: polekat62 on August 08, 2012, 01:08:01 PM
I have a HO 3-truck Climax and would like to remove the middle and rear trucks.I have not been successful on figuring out how to. Any info would be welcome
                                                                          Dale
Title: Re: 3 -truck Climax - truck removal
Post by: Geared Steam on August 08, 2012, 07:44:46 PM
This link shows how to do it on the On30 version, comparing it to my HO scale Climax, it appears the design is the same. Let us know.

http://www.foothillmodelworks.com/ClimaxRebuild/B_Climax_1.html (http://www.foothillmodelworks.com/ClimaxRebuild/B_Climax_1.html)
Title: Re: 3 -truck Climax - truck removal
Post by: polekat62 on August 09, 2012, 12:13:33 PM
I found the solution, thanks to a fellow at Bachmann train Co. by the name of Joe. Make sure the drive shaft is disconnected, then grasp the truck and gently wiggle and pull and they just come off real slick like .
                                                     Dale
Text only | Text with Images