Does Toby do anything other than pull Henrietta?
To make life simple I figured I could permanently couple the 2 together and place the decoder and speaker in Henrietta.
He pulls trucks, milk, etc. But the Henrietta idea sounds fine. :)
there might be enough room in Toby for both the decoder and speaker, depending on size. what decoder do you plan on using? i have a digitrax DH123 decoder in my Toby and it has room left, if i plan to put in a speaker.
Thanks Anthony, I plan on using a Digitrax controller.
Go to the different DCC manufacturer's site. The decoder sizes are there as well as speakers.
Litchfield Station, a very good on line DCC company spells out the decoder sizes also.
A little research will minimize buying the wrong item if you have not DCC installs before.
Are you using a Digitrax sound decoder with a different DCC system or a Digitrax DCC control system?
Rich
Also, A Tsunami Micro or LokSound Micro are both quite small. I have used both.
Rich
Thanks guys, I'm going with Digitrax as the main controller but thus far I have not purchased anything.
Keep things in persecutive. About $50.00 to $130 for sound decoder and speaker, depending on the brand.
For no sound. About $20.00.
Rich