Bachmann Online Forum

Discussion Boards => HO => Topic started by: NCStL on November 19, 2012, 12:06:18 PM

Title: Track connector of DCC box
Post by: NCStL on November 19, 2012, 12:06:18 PM
What is the size of the plug on the track connector of the DCC controller?
I bought a controller on ebay that did not come with the wire and plug.
Can I get that at Radio Shack?
Bob
Title: Re: Track connector of DCC box
Post by: richg on November 19, 2012, 12:14:22 PM
You left out important info.

Which brand of controller?

Which model controller?

Rich
Title: Re: Track connector of DCC box
Post by: NCStL on November 19, 2012, 02:59:46 PM
BACHMANN! Am I on the wrong forum? The little gray box that comes with the EZ Command package.
Title: Re: Track connector of DCC box
Post by: richg on November 19, 2012, 03:09:06 PM
You have the correct forums.
There are two different DCC systems sold by Bachmann. The EZ Command and the Dynamis.
Look in the Products page.
Look in the Parts page for possible parts.
Take time to look though ALL the Bachmann site, not just the forums.

Rich
Title: Re: Track connector of DCC box
Post by: Doneldon on November 20, 2012, 09:37:44 AM
Bob-

You are looking for part number  BAC00002. It's $4.00 from Bachmann. I ordinarily suggest that people make up
their own connectors but this one wouldn't be easy. It is a two-conductor cable (no problem) with a strereo mini
plug on one end (no problem) and what I believe is a Bachmann proprietary plug on the other (big problem as you
can't purchase these separately from, say, Radio Shack). So order it from Mr. B.

                                                                                                                                 -- D