I need to remove the shell on a new Bachmann EMD F7A so I can install decoder. Can anyone help. I have tried spreading the sides to clear the tabs, but the frame doesn't move from inside the shell.
Thanks for any help.
Jon
Fuel tank snaps off then remove the screws. I believe there is four.
Jerry
If it is like the new "Blue Box" models, there will be 4 screws around the fuel tank going through the frame that need to come out to release the shell. If the one you have is like this, the 2 screws you see in the fuel tank, hold the motor cradle to the frame and don't need to come out unless you want to remove the motor too.