Text only | Text with Images

Bachmann Online Forum

Discussion Boards => HO => Topic started by: mshortell99 on January 01, 2013, 12:57:07 PM

Title: Programming EZ Tack DCC turnout to Digitrax Zephyr DCC
Post by: mshortell99 on January 01, 2013, 12:57:07 PM
Have installed a new EZ Track DCC Turnout in our layout.  We use a Digitrax Zephyr DCC controller.  The instructions with the Turnout were limited to how to program to the Bachmann DCC controller.  Can anyone give us some guidance on how to program the turnout to the Digitrax DCC?
Title: Re: Programming EZ Tack DCC turnout to Digitrax Zephyr DCC
Post by: stephenphillip on February 27, 2013, 08:19:49 PM
Did you ever get a reply?  I am having the same problem with the Digitrax DCS51.
Title: Re: Programming EZ Tack DCC turnout to Digitrax Zephyr DCC
Post by: bapguy on February 28, 2013, 04:59:28 PM
See the DCC turnouts and Dynamis thread on this forum.  Joe
Text only | Text with Images