i have two bachmann s4 switchers they are new.my problem is that one takes slow the other on takes off like a rocket.all the cvs are the same
on both engines.any >:( one got a idea?
On DCC engines you can speed match the locos. There are several ways to do this. I suggest Googleing speed matching dcc loco's. CV2 is the start voltage, CV3 is acceleration, CV4 deceleration. You can slow the fast loco or speed up the slow one. Joe
A quick way to slow the acceleration rate of the 'FAST' loco is use a higher value in CV3 try 25 then if that is too slow go to a lower number or if still to fast try a higher number!
Just as a matter of interest set CV 3 to 255 ( the Maximum Value) then try the loco you will probably have time to make a coffee before it speeds up!!