I'm working on a new 0n30 layout where there will be a U.S. Navy Auxiliary Seaplane Base with a couple of PBYs on the ramp.
I want to use the Plasticville motel (#45616) for some base housing units.
Can anyone tell me the height of the doorways on this unit?
Thanks & Happy RRing,
Jerry
The height from the bottom sill to top of door is 1.75 in. It is closer to s gauge than o so cars people etc. will be smaller than 1/48
ron m:
A big Thank You for the reply!
Since 1.75" is equivalent to 84" in 1:48, and a 'standard' door is nominally 80" tall, I think the buildings will be okay for my intended use.
I had already assumed that these buildings were probably small for 0-scale, and intend to use them in the background. Call it 'forced perspective!'
Thanks Again, & Happy RRing.
Jerry
Most stuff from Plasticvile until there was H.O. was made to be used with either S or O gauge trains. The stuff for O gauge is much closer to S gauge.
Just an observation, but most O gauge trains are not always scale models or they have differant scale sizes; anything from 1:43 to 1:48 is supposed to be O gauge.
Lee F.