Print Page - trik big boy with loksound V3.0 2004

Title: trik big boy with loksound V3.0 2004
Post by: dankoesterman on March 12, 2013, 02:55:05 PM

I bought this engine used from a person that was using the EZ command. he had 8 functions set up. i'am using the zephry extra with 29 functions. i can not find any information on how many functions this decoder has or how to add functions can this be fixed or am i better off switching it to a Tsunami? Ive been thru the loksound web page and the loksound manuel and have not found any information. Any help would be appreciated

Title: Re: trik big boy with loksound V3.0 2004
Post by: richg on March 12, 2013, 03:09:51 PM

Do a decoder reset and start from there.
I use LokSound and they are very good. Some people think they are better but I see them running neck and neck with the Tsunami. Both have their advantages. I use both brands. I started with the v3.5 so no knowledge of the v3.0 but they are suppose to be programmable if you have the programmer.
There is also a very active Yahoo LokSound Group.

http://groups.yahoo.com/group/loksound/

Rich

Title: Re: trik big boy with loksound V3.0 2004
Post by: dankoesterman on March 12, 2013, 03:20:16 PM

Thanks Rich, I will do the reset and also check out the support group.

Title: Re: trik big boy with loksound V3.0 2004
Post by: dankoesterman on March 12, 2013, 04:48:17 PM

I did the reset, now the waterpump sound stays on all the time and no function key will work to shut it off.

Bachmann Online Forum

Discussion Boards => HO => Topic started by: dankoesterman on March 12, 2013, 02:55:05 PM