well i started to install some dcc turnouts on my layout . i went into turnout/asc programming . i get program to main and service gets you into cvs . then the other ones assign on service track, but nothing to program on main to assign the switch a number , on my controller . what i did took every engine off the tracks or lighted cars. undid my main service power hook up and changed it to the service track so my layout is all service . ok i hit the mode button on switch it clicks then i hit program on service with a address of 001 /1 /1 i get error messeges 11 or 12 . i tried all different ways but nothing to fix the trouble to get a dcc turnout to work with controller . i searched the net then read the paper it went with it ( set up on ez command nothing abount dynamis) check Dynamis booklet nothing in that booklet to a main track or servic track programming check bachman s you tube and they hit the buttons to switch but nothing to program with dynamis . what the heck am i doing wrong i even took a long break and went back researched nothing to help so im posting on here . i wont be back on until tomarrow nite after work
Dave the frustrated switchman with a closed down railroad :-[
On the search feature above, enter DCC turnouts and Dynamis. Then enter the Bach-man in the by user. Joe
Thank you Joe somehow somebody needs to do a you tube of this ;D ok so i need to take some of my track apart and program before i install . note program turnouts on service track (like a locomotive ) before you install on layout . i did not do that lesson learned after 15 locos where sitting on the track that got address 1 and all took off at once . i need that B&O crane deployed to sit some of the cars that got derailed and bring all locos in for a tune up . Dave
http://www.youtube.com/watch?v=iqW8J6ecoyk&list=PL432C620079734609&index=26
Are you using EZ track turnouts? If so, are you pressing the programming button on the turnout to enter it into programming mode?
yes i am tried everything push program button , hit the acc program to 1 acc program error . i finally just gave up . i think they got programmed to a mystery CV DAve