Text only | Text with Images

Bachmann Online Forum

Discussion Boards => General Discussion => Topic started by: jazzharmonicat on August 09, 2013, 09:47:35 PM

Title: Just purchased a used Dynamis DCC controller system -- questions
Post by: jazzharmonicat on August 09, 2013, 09:47:35 PM
How do I tell which model I have?
How can I order a power supply for it?
Title: Re: Just purchased a used Dynamis DCC controller system -- questions
Post by: Doneldon on August 09, 2013, 11:31:33 PM
jazzcat-

You can get a copy of the Dynamis manual here:

     http://www.bachmanntrains.com/home-usa/ez_content/dynamis_manual.pdf

The input for Dynamis is 15.5 volts at 2.5 amps. You can use an old wall wart if you have one with the correct rating.

I hope it all works well for you.

                                                   -- D
Text only | Text with Images