Bachmann Online Forum

Discussion Boards => HO => Topic started by: union pacific 4014 on October 11, 2014, 07:31:43 PM

Title: resetting decoder
Post by: union pacific 4014 on October 11, 2014, 07:31:43 PM
how do i reset a bachmann decoder withe nce power cab?
Title: Re: resetting decoder
Post by: Hunt on October 11, 2014, 09:35:38 PM
Follow the decoder and NCE Power Cab instructions.




Technical Tip

Do not use the NCE Recovery Programming (Option 7) on page 54 of the printed Power Cab System Reference Manual REV. 1.65.

Read USE PROGRAM TRACK  section  CHANGE ANY CV IN DECODER. Refer to page 46.  Now
Click Here  (http://www.bachmanntrains.com/home-usa/board/index.php/topic,28359.0.html) After reading then to CV 8, enter 8
Title: Re: resetting decoder
Post by: union pacific 4014 on October 12, 2014, 10:48:16 AM
 now today the bachmann decoder   is dead won't do anything
Title: Re: resetting decoder
Post by: Hunt on October 12, 2014, 01:25:39 PM
After a successful decoder reset, the locomotive is controlled with address 3 until you program decoder to another address.
Title: Re: resetting decoder
Post by: union pacific 4014 on October 12, 2014, 03:04:37 PM
yeah i know still dead as a door nail tho